How To Add Value To Your Small-Scale Property Development Project

They say small is beautiful, but perhaps’ small is realistic’ might be more accurate when it comes to homebuyers looking to take that first step onto the housing ladder. As a developer, catering for this segment of the market can be an attractive proposition. Firstly, it’s a ‘need’ market rather than a ‘want’. People tend to want rather than need a five-bed detached house, but when it comes to having somewhere to live, they NEED a one-bedroom flat or a two-bedroom house. Building these types of property means your units should sell more easily in any given market conditions. Secondly, creating entry-level flats or houses allows you to take advantage of the new and recently improved permitted development rights that enable you to convert existing commercial buildings. This usually means less planning risk and shorter turnaround times.

And finally, these types of units have relatively high values per square metre. That’s because you can build more one-bed flats in any given floor space than you can any other type of dwelling.

But small can have its ugly side too. You don’t need a particularly long memory to recall the rogue developers who built tiny flats with no windows under permitted development. It was this outrage that led to an important recent change in the rules. From 6th April 2021, all permitted development schemes must comply with National Space Standards and have adequate natural light. So, if you’re building a one-bed flat with a shower room, you’re now looking at a minimum internal area of 37m2, or 39m2 if baths are your thing. And if you were worried that permitted development rights were still a free pass for rogue developers to build sub-standard homes, your mind can now be put at rest.

One of the challenges that any developer faces when building entry-level homes is how to stand out from the crowd. Build a large, detached house, and you have the budget and space to create a few wow factors. But a small one-bed flat is a different proposition, and of course, many purpose-built apartments are all pretty much alike. So, what can you do to have your beautiful new flats stand out from the crowd? And what will either increase their value or at least help them shift more quickly? Here are a few ideas that might help.

  1. Make the most of heritage features

One aspect of converting a commercial property to residential is that you’re likely to inherit a few design features from the host building, often unavoidably so. But rather than being a negative, it’s possible to turn these into ‘heritage’ features that add character. Think of the New York loft apartments or the old Thameside warehouses in central London. Not so many decades ago, these would have been perceived as about as far from des res as you could get. Today they command a premium, partly because of their location but also because of their character. So, make a point of retaining and celebrating the quirks and features of your building, and it will stand out from the more run-of-the-mill competition in purpose-built blocks.

  1. Maximise storage space

Cat swinging is not something that happens much in smaller flats and houses, where storage space also comes at a premium. In particular, larger items like vacuum cleaners and suitcases struggle to find a home and so tend to lie around, cluttering up the place. Thinking about storage space at the earliest design stage can pay dividends since it can both add value and differentiate you from others on the market. Even the smallest spaces can be used for storage, so don’t feel embarrassed about creating a small or narrow cupboard; it will still be useful.

Think also about headroom and whether there’s scope to incorporate some storage space by lowering the ceiling height in certain areas. It might not be so handy for storing the ironing board but can be a godsend for the longer-term storage items. Just ask anybody who has a loft.

  1. Go for premium accents

A common mistake I see new developers make when building lower-priced homes is to opt for the lowest cost specification throughout. This is a massive own goal since it’s the little things that can make a big difference. Cheap single panel doors with basic door furniture make the whole place feel low rent and borderline institutional. But you don’t need to step too many rungs up the pricing ladder to get a mid-range wooden door and some nice, brushed steel handles, plus you probably won’t have that many doors in each unit. Overall, your budget will only have increased by a small amount, but the customers’ perception of the quality will go up disproportionately. The same rule applies to light switches and power sockets; white is perfectly acceptable, but chrome or colour adds character; just be mindful of the overall cost.

  1. Install premium appliances

I know what you’re thinking – top-of-the-range washing machines are all very nice, but what about the budget? Well, here’s where branding can work in your favour. Of course, premium brands such as Bosch, Neff, AEG, and Siemens cost more, and they’re not what most people would expect to find in basic flats. Yet all of these brands offer entry-level models that, while light on features, are heavy on brand cachet and don’t cost a great deal more. Your customers will notice the brand, not the model, and it can help lift the perceived quality of the entire home.

  1. Install bigger shower cubicles

Small homes usually come with small rooms, and bathrooms are no exception. Yet we all know how uncomfortable it is when you’re trying to take a shower in a cubicle that’s barely big enough to turn around in. Instead, make a point of going large on the shower front so that its size is immediately noticeable when you walk into the room. Naturally, this will mean pinching space from somewhere else. Still, it’s unlikely to be a colossal compromise – even a large shower doesn’t take up a vast amount of space. But I guarantee you it’s something that people will notice, and it can make a difference to a home’s saleability.

  1. Don’t skimp on the tiling

When creating a tiled splashback behind the basin, you can save a few pounds by not tiling down to the ground. The thing is, the wall behind the basin is a place where dust and dirt accumulate over time, and it’s much messier and more difficult to clean if it’s not tiled. So, do the decent thing and tile down to the floor. The increased cost is negligible, and it’s one of those little touches that can make a room seem more homely, even if people struggle to put their finger on exactly why.

  1. Maximise lighting quality

No one likes a poky flat, and now that natural light is a requirement for both permitted development and full planning schemes, its absence shouldn’t be an issue. But you should still take time out at the design stage to work with your design team on maximising the amount of light you’re getting into your units. It’s not just natural light you need to worry about; a few strategically placed downlighters can make a real difference. That said, don’t spend money unnecessarily; I recall one developer who blew a small fortune on sophisticated mood lighting, forgetting that viewings would be happening in daylight hours.

  1. Install multi-room Bluetooth speakers

Slipping in a couple of Bluetooth speakers in the lounge and bedroom ceiling allows you to play music throughout using an app on your phone. The cost is negligible when you include it within the design specification rather than attempting to retrofit, and there’s a small wow moment at play on each viewing when the estate agent flicks on some tunes. It’s not so much the novelty of the solution but the thoughtfulness and quality that strikes a chord, and I suspect that few of your competitors will have bothered.

  1. Open up roof voids

A key challenge with small flats is that they’re, well, small. Of course, you can make them bigger, but then you need to charge more for them, plus your values per m2 will be lower. One idea that can work well on conversion projects is to open the roof voids to create vaulted ceilings. This can dramatically increase the feeling of space and make your units far more appealing when compared to other flats with the same footprint. They feel a lot bigger and more spacious.

  1. Go for quality splashbacks

We always install deeper than usual splashbacks in our kitchens, as not only do they look better, they’re also more practical. Another item we include is a frosted glass splashback behind the hob, as this adds a quality touch without costing a fortune.

But the ‘ugly is beautiful’ thing doesn’t end there, as there is a raft of other benefits to converting light industrial buildings. Let me share a few of them with you. Firstly, most light industrial buildings will be built on a thick concrete slab. This slab will typically extend across the entire floor plate and should be more than sufficient to support a residential building. This means that wherever you want to build a wall, you already have a nice firm base in place on which to build it. In many cases, the base may even be deep enough to support a multi-storey residential building, and let’s face it, two storeys is always going to be more profitable than one.

So, there’s a few ideas to get you thinking. Perhaps the most critical thing to remember is that, while home buying is a practical necessity for most buyers, the actual home people choose to purchase nearly always ends up being an emotional decision. Ultimately, it comes down to whether they can imagine living there and does it feel like a place they could call home. It’s often not one specific element that swings the decision, but more a number of things combined. Your ability to include little touches of quality or luxury can undoubtedly make a big difference, as can giving some thought to elements such as lighting and storage.

The key is to consider these things at the design stage so you can incorporate them from the outset and not to blow the budget on unnecessary items. With a bit of imagination, some foresight, and a little extra strategic expenditure, it should be possible to add a lot of value to your developments without breaking the bank.

< PREVIOUS      NEXT>